full switch adapted Hungry Hippos setup

Switch Adpated Hungry Hungry Hippos

Scroll down to content

I thought it could be pretty cool to try switch adapting the Hungry Hungry Hippos game. In researching what had already been done I found this product from Enabling devices which is a mechanical adaptation utilizing a paddle to make pressing the lever easier. I also found this project from the UConn Biomedical Engineering program which used motors and was switch adapted.

Below is a video of my version in action. It’s a little more compact (just a servo, arm and paper clip) but also for now just focusing on the eating lever of each hippo.

Here’s the servo and bracket setup that I used for each hippo. The bracket is from Lynxmotion and the arm parts and servo were from ServoCity:

Below are pictures of the control board. The servos could be simply driven from an Arduino directly, but I decided to solder together a more robust board with a few extra features. The essential components are the microcontroller, switch jacks, servo pin headers, and power jack.

Since the servos I was using exhibited a motor whine even when just holding position I needed a way to idle them. Unlike analog servos, digital servos keep trying to hold their position for as long as they have power even if you stop sending them a control signal. So for this I added a transistor for each servo acting as a low side switch, cutting off power when the servo is not in use. Also, these servos draw a huge amount of current when moving quickly out of a full stop. Though powering them from 4 D batteries worked fine, most of my power supplies would temporarily shut down when detecting the sudden huge current draw. To rectify this I added a very large capacitor that was able to supply the initial surge current needed. Again, using battery power instead, different servos, or moving them more slowly would have also worked.

I opted to hot glue the control board under the center of the game board to better conceal and protect some of the wiring and electrical components. I got some Duplos from my daughter to act as risers for the game board.

 

 

4 Replies to “Switch Adpated Hungry Hungry Hippos”

  1. I love this! I work with students with severe and multiple disabilities and I’d love to make one! But I’m not technologically savvy

    1. Hi Shosh,
      Thank you for your comment and my apologies for the very delayed reply.
      I don’t have time at the moment to post a detailed tutorial or provide instructions. But, most of the components can be sourced at hobby electronics outlets like Adafruit, SparkFun, and Pololu. They also have great customer support and user forums to help people of all levels of experience with projects.

Leave a Reply to Nils Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: